The Heatmiser UH8-RF V2 is an 8-zone wireless wiring centre. It works with Heatmiser Slimline-RF and Heatmiser neoAir Thermostats. This unit provides central switching and is therefore ideally placed next to your underfloor heating manifold.
This wireless wiring centre can control up to eight zones. It also provides an output for a hot water cylinder. When any zone demands heat, a 230v output is provided. This output switches the relevant zone actuators, underfloor heating pump, and valve. A volt-free connection is supplied for the boiler, so it is compatible with almost all boiler types. The boiler signal can also be sent via RF to the RF Switch. This gives the installer a totally wireless solution.
You can connect up to six actuators to each zone. An external aerial is available if you mount the Heatmiser UH8-RF in a metal cupboard or if the wireless signal is restricted. Only one wiring centre is required per manifold.
Key Features and Benefits
A software option in the thermostat allows you to configure which zones are underfloor heating and which zones are radiators. Radiator zones will not enable the underfloor heating pump, valve, and boiler when there is a call for heat. Radiator zones should enable the boiler from the end switch of the valve.
Heatmiser UH8-RF V2 Benefits:
- Central Wiring: Provides central wiring for up to 8 zones.
- DIN Rail Mounting: Features a DIN Rail Mounting Option (DIN Rail not included).
- Underfloor Heating Control: An output for the underfloor heating valve and pump is activated when any thermostat calls for heat.
- Wireless Functionality: Includes a wireless fail-safe function and wireless boiler link (RF Switch optional).
- Compatibility: Works with our Slimline-RF and neoAir thermostats.
- Multiple Outputs: Provides an output for multiple radiator zones and domestic hot water.
- Actuator Outputs: Actuator outputs are 230v.
For our full Heatmiser product range, click here.
